The brush filter is made of high quality carbon steel, stainless steel mesh, with handle nylon brush, sewage valve, and pressure gauge. The water flow passes through the brush filter, and the impurities are intercepted. When the sewage is needed, as long as the sewage valve is opened, the handle is gently rotated, and the sewage can be complete, and the filter and clean the inner screen.
The brush filter can be installed horizontally or vertically, but it should be noted that the direction of the water flow should be consistent with the outer casing arrow, and the direction of the water flow is required to be topped. When the pressure difference between import and export reaches 0. 04MPa, you need to open the sewage valve, and the handle is gently rotating the handle and brush the filter until the sewage exit water is cleaned and sewed. The entire sewage process system can operate normally without stopping. Working pressure ≤ 1.0MPa (more than this pressure, need to be indicated), operating temperature ≤150 ° C, compression ≤0.01 5MPa, filter accuracy and size can be specially customized according to user requirements.